"注：部分詳情描述與標題不符，價格根據當時銅價核算詳情了解請我司銷售。

中要求1、2、3、6、4、5、7、8線必須是雙絞。這是因為，在數據的傳輸中，為了和外界的，發送和接收的數據均以差分傳輸，即每一對線互相扭在一起傳輸一路差分信 號（這也是雙絞線名稱的由來）。

工作電容：平均值 52±2nF/km

(ZR192-)KFGR(YGC-KF46R) 氟46(進口PFA)絕緣硅橡膠護套控制軟電纜。

ZR-HYA22：銅芯實心聚烯烴絕緣擋潮層聚護套鋼帶鎧裝阻燃聚氯護套市內通信電纜

HJYJVP3/SA BJYC3V32/SA成束阻燃型交聯聚絕緣、聚氯護套、鋁塑復合帶繞包總屏蔽呼叫通信電纜。

RVVZ 4X10 1X6平方線纜


全聚氯局用電纜HJVV HJVVP 105芯（21×3×0.5+21×2×0.5）全聚氯局用電纜

電纜長度：機械保護型電纜是根據相應基本電纜的長度制造。

much more serious negotiation was running its course at the same time. When the Emperor had been informed that Philip had desisted from the pursuit of the match for himself, he begged him to support the suit of the Archduke Ferdinand. It was considered unadvisable to mention at first which of the Archdukes was the suitor, but Philip himself made no secret of his preference to Ferdinand, who was a narrow bigot of his own school; so the Spanish ambassador in England was instructed to forward the matter to the best of his ability, in conjunction with an imperial ambassador who was to be sent for the pure. When the instructions arrived, matters had gone so far that a secretary had already come to London from the Emperor with letters for the Queen and a portrait of Ferdinand. This had been arranged by Sir Thomas Challoner, who had recently been in Vienna; but much dou existed as to the sincerity of Philip’s professions of good-will towards the affair. Indeed, those who were most in four of it appear to he though

ZR-BPFFP3 氟46絕緣和護套鋁聚酯復合膜繞包屏蔽耐高溫變頻電力電纜。

MHYBV(HUYBV) 礦用聚絕緣、鍍鋅鋼絲編織鎧裝、阻燃聚氯護套通信電纜 5-50 1/0.8 用于機械沖擊較高的平巷、斜巷 。

DJYP3VP3R 銅芯聚絕緣對絞，鋁箔/塑料薄復合帶屏蔽，鋁箔/塑料薄膜復合帶總屏蔽聚氯護套電子計算機軟電纜。

RVVZ 4X10 1X6平方線纜




在交聯聚絕緣高阻燃的基礎上又了低煙無鹵高阻燃隔氧層電力電纜，其低煙無鹵性能符合GB/T17651.1.2和GB/T17650.1.2。這樣本公司的交聯聚電力電纜的整體水平低于國內地位。

電力電纜用輸配電，本公司生產的交流額定電壓0.6/1KV聚氯絕緣電力電纜和35KV及以下交聯聚電力電纜，其性能不僅符合GB1276和IEC60502及IEC60840，并且已形成系列，即阻燃型的、耐火型的、耐寒型的和防水型的電力電纜。

鐵路電纜產品功能：鐵路數字電纜具有傳輸模擬(1MHz)、數字(2Mbit/s)、額定電壓交流750V或直流1100V及以下控制信息及電能的傳輸功能。適用于鐵路自動閉塞、計軸、車站電碼化、計算機連鎖、微機監測、調度集中、調度、大功率電動轉轍機等有關設備和控制裝置之間傳輸控制信息、監測信息和電能。
RVVZ 4X10 1X6平方線纜



nd Throgmorton, and suggested that if the Queen married the Archduke, Leicester might be provided with a wife and his ition secured by his wedding some relative of the Emperor, such as the young Princess of Cleves, who was then fifteen. Throgmorton was quite in love with the idea, and approached the Emperor’s envoy with suggestions of Leicester’s marriage with a sister of the Emperor or some95 other princess of the house of Austria. The proal was of course received very coldly. Guzman thought the object of it was perhaps only to couple Leicester’s name with those of great marriageable princesses, in order that the people might gradually be brought to consider him a fit huand for the Queen, who had always told the ambassador that she would marry him (Leicester) if he were a king’s son, but the real pure was to buy off Leicester’s opition to the Archduke. The sham proals for the marriage of the Queen

HYAT23 鎧裝通信電纜用途：鎧裝通信電纜機械保護層可以加到任何結構的電纜上，以電纜的機械強度，防侵蝕能力，是為易受機械及易受侵蝕的地區而設計的電纜?？梢圆捎萌魏我环N敷設，更適用于巖石地區的直埋敷設。

密集電纜多根密集配置時電纜的難燃性，應按""成束電線電纜試驗""，以及電纜配置情況、所需防止災難故和經濟合理的原則，適合的類別要求。在外部火勢作用一定時間內需維持通電的下列場所或回路，明敷的電纜應實施耐火防護或選用具有耐火性的電纜。如消防、、應急照明、遮斷器操作直流電源和發電機組緊急停機的保全電源等重要回路；電腦監控、雙重化繼電保護、保安電源等雙回路合用同一通道未相互隔離時其中一個回路。

 中型橡套電纜YZW-0.5kv 3*6+4

橡套電纜是由多股的細銅絲為導體,外包橡膠絕緣和橡膠護套的一種柔軟可移動的電纜品種. 一般來講,包括通用橡套軟電纜,電焊機電纜,潛水電機電纜,無線電裝置電纜和攝影光源電纜等品種.

天津市電纜總廠.

地址：河北省大城縣劉演馬工業區

.   銷售部總：. 手機；.

橡套電纜廣泛使用于各種電器設備,例如日用電器,電動機械,電工裝置和器具的移動式電源線,同時可在室內或戶外環境條件下使用.根據電纜所受的機械外力,在產品結構上分為輕型,中型和重型三類,在截面上也有適當的銜接.一般輕型橡套電纜使用于日用電器,小型電動設備,要求柔軟,輕巧,彎曲性能好;中型橡套電纜除工業用外,廣泛用于農業電氣化中,重型電纜用于如港口機械,探照燈,農業大型水力排灌站等場合.這類產品具有良好的通用性,系列規格完整,性能良好和穩定.

防水橡套電纜和潛水泵用電纜,主要用于潛水電機配套.

無線電裝置用電纜,目前主要生產兩種橡套電纜(一種屏蔽的,一種不屏蔽),基本能滿足要求.

攝影用電纜產品,配合新型光源的發展,具有結構小,性能好,同時滿足室內和野外工作的需要,逐步取代一些粗重,耐熱性能差的老產品.

橡套電纜分為重型橡套軟電纜，中型橡套軟電纜，輕型橡套軟電纜，防水橡套軟電纜，電焊機電纜天津市電纜總廠.

中型橡套電纜YZW-0.5kv 3*6+4

.   銷售部總：. 手機；.

電焊機電纜產品說明

本產品適用于對地電壓交流不超過200V和脈動直流峰值400V電焊機用二次側接線及連接電焊鉗.是適用于電焊機二次側接線及連接電焊鉗的電纜,額定電壓交流不超過200V和脈動直流峰值400V。結構為單線芯,采用多股軟導線復絞制成。導電線芯外面采用耐熱聚酯薄膜絕緣帶繞包,外層用橡皮制成的絕緣兼護套做為保護層。

防水橡套軟電纜產品說明中型橡套電纜YZW-0.5kv 3*6+4

礦用橡套電纜結構特點：一：導電線芯。柔軟性要求以電鉆電纜，采掘機電纜為高；導線結構采取如下措施：1，采用較軟的細直徑銅單線、以小節距束合、復絞。整根電纜的彎曲扭轉性還受到絕緣、護套結構的影響，因此不能認為單絲越細，節距越小越好。2，采用同向束絞和復絞可提高柔軟性。3，為了便于導線在絕緣層中的相對滑動和便于安裝維修。電鉆電纜和小截面的采掘機電纜導線單絲應鍍錫，大截面采掘機電纜在導線外還用包紙帶隔離絕緣。二：絕緣層要求有足夠的電絕緣性能1，采用含膠量不低于百分之35的橡皮2，絕緣厚度比通用橡套電纜要厚3，采用電性好的橡皮，并采用好的擠橡工藝（如擠橡硫化連續生產線）

1、電纜絕緣主線芯之間及主線芯與地線之間的絕緣電阻,換算到+20℃時不低于100MΩ•km。

2、主線芯屏蔽層的過渡電阻換算到20℃時不高于3kΩ。

3、產品標準：MT818.5-1999。

4、MYP型電纜有3個帶絕緣屏蔽的主線芯和一個包覆半導電橡皮層的地線組成，圍繞半導電橡皮層墊芯絞合成纜。外面擠包黑色氯化聚乙烯橡皮護套或黑色氯丁橡皮護套。

5、導電線芯：采用軟銅線，其性能符合 GB/T3956-1997。

6、絕緣：采用GB7594.2-1987中XJ-00A型橡皮。

"